Carbon deposit and sludge in intake manifold & combustion chamber
Carbon in intake manifold, valve, ports and reduce air intake efficiency
With the assistance of unique machine DR.QMAX Water Base Carbon Cleaner is able to remove carbon deposits from intake manifold, valve, combustion chamber, and exhaust.
Dr.Qmax Water Base Carbon Cleaner Instruction [Suitable for Diesel / Petrol & NGV Engine]
Start the engine, let idle and warm up for a few minutes
Then run the engine at 1800-2000 RPM by using custom made accelerator paddle adjustor.
Open de-carbonizer cover, fill up with carbon cleaner into the tank. Then close back the cover.
Connect the compressed air into de-carbonizer intake valve & make sure the air pressure gauge at 70 PSI
Insert the spray nozzle of de-carbonizer face to the throuttle body or carburetor. (caution: Never touch to the throuttle body butterfly)
Switch on the air compressor and open input valve, slowly open output valve until the RPM drop to 1500 and stay put.
Carbon cleaner start flow in and spray into the intake valve or carburetor.
The intake manifold will become cold around 3 minutes later (Injection engine only)
Close the input valve and take off the compressed air supply, stop the engine 5 minutes after decarbonizing
Remove the spray nozzle and fix back the rubber hose to the intake valve.
V-CLASS MOTORSPORT (M) SDN BHD
21-1, Jalan Metro Perdana Timur 1,
Taman Usahawan Kepong, 52100 Kuala Lumpur.
Tel: 603 6258 3608
Fax: 603 6250 0838
Email : email@example.com