CYCLONE 3/5 is a non-moving vortex generator that goes inside your air intake hose, right after your air filter.
CYCLONE 3/5 produces uniform engine power for each cylinder and piston during combustion. This consistent force eliminates abnormal engine noise and vibration, resulting in smoother operation and longer engine life.
CYCLONE 3/5 cleans the carbon in the combustion chamber, preventing unburned fuel accumulation or carbon build-up. It eliminates knocking, per-ignition and dieseling, thereby extending the life of the engine.
It is made entirely from stainless steel, requires no maintenance, and only takes a few minutes and a screwdriver to install. More…
By improving air circulation and air control in the engine, there is no need to push the accelerator pedal as far as before for equal performance. The result: direct savings on fuel costs. By installing a Cyclone 3/5, you create the possibility to save fuel on three fronts.
More Complete Combustion Process – More Power Out Of Every Litre The Cyclone 3/5 enables a different driving style. Since your engine has already torque at a lower speed, you can up shift earlier and thus use less fuel.
The air vortex ensures better air-fuel ratio and improves the strength of the combustion air supply. Having cleared obstacles more easily, the air is delivered faster and in greater amounts where we want it to go, i.e. into the combustion chamber. More fuel is burned and fewer residues are produced as a result.
In many cases the vortex continues into the cylinder and its effect is maintained even in the compression stroke. This ensures a more balanced distribution of force on the piston head, and you get even more energy out of every litre of fuel. This eventually results in fuel savings.
Maintain Factory Values Regarding Fuel Consumption The fuel consumption of engines will increase over time as contaminants gradually build up inside. Engine pollution negatively impacts the supply of combustion air, when passage through an intake is narrowed by carbon deposits, for example. Moreover, it leads to changing temperature patterns and air flow, so that the theoretically optimized combustion process no longer reaches full completion and fuel consumption increases. The vortex created by the Cyclone 3/5 keeps your engine clean. The factory values regarding fuel consumption are therefore maintained.
A more complete combustion process and long-lasting clean engine ensure that contaminants are not added to the volume of harmful emissions. The NOx reducing EGR also works better with a Cyclone 3/5.
Complete Combustion In The Engine Fewer Emission Thanks to an improved and more powerful air supply and the vortex, which in many cases continues into the cylinders, a more complete combustion is achieved. Incomplete combustion processes not only waste fuel, they are also directly responsible for an increase in harmful emissions.
Harmful emissions from internal combustion engines will also increase over time as a result of the gradual build-up of contaminants in the engine. Carbon deposits on valves and cylinders are a common occurrence. In some cases, the build-up of scale is very serious, and valves and fittings may become completely obstructed. In diesel engines, this will often occur earlier than in petrol engines. Diesel engines may therefore face the obstruction of the EGR valve.
In summary: the build-up of contaminants leads to more contamination resulting in an increase in harmful emissions.
The Cyclone 3/5 produces a powerful air vortex. This gives contaminants no chance to build up, which in turn eliminates this contribution to harmful emissions.
Improves The Efficiency Of Catalytic Converters & Diesel Particulate Filters If a Cyclone 3/5 is placed before a catalytic converter or a particulate filter, this increases efficiency and reduces emissions. Due to the vortex, the intake air is more evenly distributed over the active surface of the filter or catalytic converter, which directly increases efficiency.
Thanks to the improved air-fuel ratio and a balanced ignition front in the cylinders, your engine runs better, even at low revs. The Cyclone 3/5 improves “Smart Driving” experience and makes it more enjoyable.
Optimized Combustion Process – More Air & Better Air Fuel In all piston engines the up and down movement of the pistons ensures the intake of combustion air into the engine. At low revs, the intake volume is significantly lower and, due to bends and obstacles, the vorticity, which helps fuel and air mix, is also reduced.
Because of the cleansing action of the air produced by the Cyclone-X, obstacles in the intake system are easily negotiated; the internal resistance is reduced, as it were, by the Cyclone 3/5. At low revs, this therefore ensures that a sufficient amount of air is supplied and that the vortex produces a better mixing ratio between the air and fuel. The result: a more optimized combustion process.
Direct Torque – Less Gear Switching With the Cyclone 3/5 torque is available earlier; you’ll immediately notice that the engine picks up better at low revs. You will also observe that the engine will not become sluggish so quickly at low revs. Where you initially had to down shift to a lower gear when reducing speed and therefore decreasing the speed of your engine, you’ll now find that the engine runs in normally.
This Improves “Smart Driving” Experience and Make It More Enjoyable An important component of “Smart Driving” consists in allowing a combustion engine to run at a lower speed and hence reduce fuel consumption and the environmental impact. If, previously, an engine at low revs would quite often yield disappointing performance, jerk and hesitate, all this can be a thing of the past if fitted with a Cyclone 3/5. The result: you will drive at lower revs sooner, turning “Smart Driving” into a more pleasant experience.
The Cyclone 3/5 swirls the air around, directly flushing out internal dirt particles. The dirt build-up causing interference in the cylinder valves and throttles stays away, and you see the effect directly as filters and motor oil remain cleaner for longer.
Keep Air Supply Clean Fitting the Cyclone-X in the engine air supply eliminates the occurrence of the most common laminar flows. With the Cyclone 3/5 there are no more areas with minimal air flow or areas where the air is completely still. Those, in particular, are the areas where dirt will build up.
Keep The Pistons, Cylinders & Valves Clean A more powerful air supply ensures a complete combustion process, which in turn minimizes residues. So, the pistons, cylinders and valves will remain cleaner. The Cyclone-X will ensure that carbon deposits will not happen again and that, if already present, they will be readily dislodged and dissolved. The much higher combustion rate has another advantage: less fuel leaks into the engine oil, which allows the latter to last longer.
Keep The EGR Valve Clean Due to environmental legislation, modern engines are equipped with a recirculation system, whereby a portion of the exhaust gas is recirculated (EGR) through the combustion process of an engine. This lowers the combustion temperature and thus the NOx emissions. However, redirecting exhaust gases (with particles) through an engine, this along with crankcase vapours, is asking for trouble if not supported by measures.
When the Cyclone 3/5 is placed directly upstream of the EGR valve, not only does it improve blending, it also ensures the necessary flow of air which prevents the build-up of dirt particles. The EGR valve is kept clean as a result.
A Clean Engine Delivers Saving A permanently clean engine will save you money on its fuel and maintenance costs.
Clean = Fuel Savings + Fewer Failures & Maintenance
The Cyclone 3/5 prevents the build-up of fouling which, in many cases, can lead to severe wear. With the Cyclone 3/5 you can easily drive at lower revs. Lower speeds contribute to reduced engine wear.
Parameters Which Influence The Service Life Of The Engine Wear is often the cause of a shorter service life of an engine. You know that you first have to let the engine reach operating temperature before asking for any kind of performance. Besides, you know that regular maintenance, clean filters and clean oil contribute to a long service life of the engine. But how do you control the other parameters?
A Void Wear Caused By Dirt Built Up A clean engine shows less wear. The Cyclone 3/5 is a powerful instrument in keeping your engine clean. The swirling air flow carries away all the dirt particles and prevents the build-up of contaminants/carbon deposits on components liable to wear, such as valves, pistons and seals.
Less Wear Thanks To A More Even Combustion Process A more even combustion process in the cylinder reduces wear on pistons and piston rings. In many cases the vortex of the Cyclone 3/5 continues into the cylinder and its effect is maintained even in the compression stroke. This makes sure that, during combustion, the forces are more evenly distributed on the piston and that the occurrence of a lopsided, wear increasing, load is prevented.
Increase Service Life Of Particulate Filter & Catalytic Converter The efficiency of a particulate filter and a catalytic converter can also be enhanced by the vortex created by the Cyclone 3/5. Filters and catalytic converters are charged more evenly and keep working better and longer as a result. Their service life is significantly increased with the Cyclone 3/5.
Extend The Service Life Of Spark Plugs & Carburetors Using the Cyclone 3/5 extends the service life of spark plugs, carburetors and injectors in the engine. When the combustion process is more complete, less contaminants are deposited on spark plugs and injectors, resulting in better performance and longer service life for the spark plugs.
Engine Oil Lasts Longer Using the Cyclone 3/5 increases the combustion rate of the fuel, which results in less fuel leaking into the engine oil. Consequently, the oil will last longer.
Extend Maintenance Intervals For Industrial Engine & Engine For Profession Applications Where engines in passenger cars often have a regular maintenance schedule, engines in other applications often need to be maintained with an experience-based frequency.
With heavy diesel engines, trucks and ships, the installation of a Cyclone 3/5 hugely extends maintenance intervals and leads to great savings in terms of oil and filters, and even reduces the use of Ad Blue. Since the EGR, the piston rings and bottom grooves stay clean, they can continue to function properly. This ultimately results in less maintenance and longer service life of the engine.
“Satu sampel Fuel Saving Devices berjenama: Qmax, Qmax &Guangdao dan Qmax& Cyclone telah dihantar untuk pengujian di SIRIM QAS International Sdn Bhd mengikut spesifikasi pengilang. Nombor Laporan Ujian 2010MA0870, 2010MA0871(A) dan 2010MA871(B) bertarikh 1 Disember 2010” Peformance improvement – examined and proven by sought after industrial SIRIM QAS certification testing.
V-CLASS MOTORSPORT (M) SDN BHD
21-1, Jalan Metro Perdana Timur 1,
Taman Usahawan Kepong, 52100 Kuala Lumpur.
Tel: 603 6258 3608
Fax: 603 6250 0838
Email : firstname.lastname@example.org