Category: Car Model – Volvo

[vc_row][vc_column width=”1/1″][vc_single_image image=”7935″ alignment=”center” style=”vc_box_shadow_3d” border_color=”grey” img_link_target=”_self” img_size=”full”][/vc_column][/vc_row][vc_row][vc_column width=”1/1″][vc_column_text]

Introduction

Vehicle plays very important role in today’s world. We use vehicle to transport from one point to another point. The most important part of the vehicle is engine, as most of the vehicles are using engine to produce kinetic energy to move. The energy produced is come from combustion in the engine. To obtain energy from combustion, it starts with the source of air, fuel and electricity managements respectively. The fuel that we used are basically fossil fuel. But after the combustion, it produces also emission gas whereby incomplete combustion occurred in vehicle causes power lacking, poor fuel economy and tend to produce more unwanted gas that causes pollution and can be harmful and affecting living creatures and eco system on earth.

Although many transportation manufacturers have take the initiative to study, design and produce eco friendlier vehicles, but most of the vehicles such as cars, trucks, motorbikes, heavy machines and etc are still depend on fossil fuel to work. The solution is, use Qmax. When Qmax products is installed on engine, it can improve internal combustion, thus giving better performance, reduce/prevent carbon built-up, improve fuel economy and reduce harmful emission gas. Not only that, in long run, it can keep the engine runs at tip top condition, reduce/prevent carbon built-up, sheer driving sensation, proven prolonging battery life, electronic, alternator & engine life, extend engine oil service interval, reduce maintenance cost, better fuel economy and cleaner emission.

[/vc_column_text][vc_row_inner][vc_column_inner width=”1/1″][vc_single_image image=”5559″ style=”vc_box_shadow_border” border_color=”grey” img_link_target=”_self” img_size=”full” img_link=”http://qmaxenergysaver.com/v1/?page_id=3905″][/vc_column_inner][/vc_row_inner][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_single_image image=”3902″ style=”vc_box_shadow_border” border_color=”grey” img_link_target=”_self” img_size=”full” img_link=”http://qmaxenergysaver.com/v1/?page_id=3905″ title=”Introduction to Petrol Engine”][vc_column_text]

Poor Combustion – Insufficient spark can also cause poor combustion or misfiring. These factors can leads to poor fuel economy, lack of power, increase maintenance cost and dirty emission.

Good Combustion – Cleaner combustion bring less deposit. Therefore less wear and tear, reduced in vibration, noise, knocking sound, carbon deposit and pollution. Increase mileage, horsepower, torque, engine smoothness and gear changes smoothness.

[/vc_column_text][/vc_column][vc_column width=”1/2″][vc_single_image image=”3914″ style=”vc_box_shadow_border” border_color=”grey” img_link_target=”_self” img_size=”full” img_link=”http://qmaxenergysaver.com/v1/?page_id=3905″ title=”Introduction to Diesel Engine”][vc_column_text]

Poor Combustion – The combustion of the diesel engine are affected by many factors. Poor combustion is the major cause of sluggish power, pollution by heavy smoke emission, poor fuel economy, and increase maintenance cost.

Good Combustion – Cleaner emission minimizes deposit formation. Hence less wear and tear, reduced in vibration, noise, and cleaner emission. Better fuel economy, more horsepower, torque, engine smoothness, gear changes smoothness and prolong engine lifespan.

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/1″][vc_column_text]

Qmax Devices on Petrol or Diesel Engine

[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_single_image image=”6777″ style=”vc_box_shadow_border” border_color=”grey” img_link_target=”_blank” title=”Qmax_FuelSaver_Advantages” img_size=”full” img_link=”http://qmaxenergysaver.com/v1/?page_id=3808″][/vc_column][vc_column width=”1/2″][vc_single_image image=”6654″ style=”vc_box_shadow_border” border_color=”grey” img_link_target=”_blank” title=”Qmax_FuelSaver_Installation_Guide” img_size=”full” img_link=”http://qmaxenergysaver.com/v1/?page_id=6653″][/vc_column][/vc_row][vc_row][vc_column width=”1/1″][vc_separator color=”grey” style=”double”][/vc_column][/vc_row][vc_row][vc_column width=”2/3″][vc_column_text]

Air Management System

Air contains oxygen gas needed for combustion. Before the air is entered into the combustion chamber, it is energized by Qmax Nano Air. It emits far-infrared ray that breaks the molecular clusters, turning the oxygen molecules more active and denser, readier to mix with fuel for more efficient combustion. Because of the uniqueness of Qmax Nano Air, it can also improve the braking power (on brake system with intake manifold vacuum hose).

[/vc_column_text][/vc_column][vc_column width=”1/3″][vc_single_image image=”3819″ border_color=”grey” img_link_target=”_self” img_size=”full” style=”vc_box_shadow_border” img_link=”http://qmaxenergysaver.com/v1/?page_id=3968″ title=”Qmax Nano Air”][/vc_column][/vc_row][vc_row][vc_column width=”1/1″][vc_separator color=”grey”][/vc_column][/vc_row][vc_row][vc_column width=”2/3″][vc_column_text]

Fuel Management System

Fuel molecules are energized when it goes through Qmax Nano Fuel. It emits the ray similar to far-infrared, that breaks molecular clusters, stimulating fuel molecules and readier to get mixed with air. Therefore, better fuel atomization for improved combustion efficiency which release more energy.

When both Air and Fuel Management System is used together, it allows not only better combustion but it also gives smoother performance, lower combustion point and producing more energy from further improved combustion. This, too, will contribute to better fuel economy, less polluting emission significantly reduce heavy smoke from vehicle.

[/vc_column_text][/vc_column][vc_column width=”1/3″][vc_single_image image=”3817″ border_color=”grey” img_link_target=”_self” img_size=”full” style=”vc_box_shadow_border” img_link=”http://qmaxenergysaver.com/v1/?page_id=3933″ title=”Qmax Nano Fuel”][/vc_column][/vc_row][vc_row][vc_column width=”1/1″][vc_separator color=”grey”][/vc_column][/vc_row][vc_row][vc_column width=”2/3″][vc_column_text]

Voltage Management System

The electricity on either old or new vehicle carries noise and distortion that will affect ECU to perform to its peak. Because of that, there is Qmax Voltage Stabilizer. It works by stabilizing the voltage, reduces distortion and noise. Hence all the electrical and electronic devices can work more effectively. When the vehicle ECU works effectively, the engine performance will get improved too. Qmax Grounding Cables contain Nano layer that greatly reduce the resistance which normally occurred in electrical cables. Because of the resistance is ultra low, it significantly outperform thicker 0 gauge wire. With this advantage, it permit greater electric current travel from one point to another, giving better battery charging and lessen the burden to the alternator.

[/vc_column_text][/vc_column][vc_column width=”1/3″][vc_single_image image=”3812″ border_color=”grey” img_link_target=”_self” img_size=”full” style=”vc_box_shadow_border” img_link=”http://qmaxenergysaver.com/v1/?page_id=3844″ title=”Qmax Super Voltage Stabilizer”][vc_single_image image=”3813″ border_color=”grey” img_link_target=”_self” img_size=”full” style=”vc_box_shadow_border” img_link=”http://qmaxenergysaver.com/v1/?page_id=3877″ title=”Qmax Nanotechnology Grounding Cable”][/vc_column][/vc_row][vc_row][vc_column width=”1/1″][vc_text_separator title=”Categories – Volvo” title_align=”separator_align_center” color=”grey”][/vc_column][/vc_row][vc_row][vc_column width=”1/1″][vc_column_text]

Qmax Nano Fuel, Qmax Nano Air and Qmax Grounding Cable installed at Volvo (Qmax Authorized Dealers, Malaysia)

[/vc_column_text][vc_gallery type=”image_grid” interval=”3″ images=”7936,7937″ onclick=”link_image” custom_links_target=”_self” img_size=”200 x 150″][/vc_column][/vc_row]